What the replica IW371439 copies

The IW371439 sits in the IWC Portuguese Chronograph line, reference family 3714. The original has a round steel case that measures 40.9 mm across and 12.3 mm thick. The dial carries applied numerals, leaf hands, a 30-minute counter at 12 o'clock, and a running seconds hand at 6 o'clock. IWC lists no date window on this model. Water resistance is 3 bar. The strap is alligator leather with a folding clasp.

Dial color and strap material change inside the 3714 family. Published spec sheets for IW371439 alone are sparse. Confirm the dial finish from a photo of the seller's stock before you pay.

Specs to compare

  • Case diameter: 40.9 mm original. Many copies land at 41 mm to 42 mm.
  • Thickness: 12.3 mm original. A 7750-based copy runs 12.5 mm to 14 mm.
  • Crystal: domed sapphire with antireflective coating on both faces.
  • Movement: IWC calibre 79350, 31 jewels, 28,800 vph, 44-hour power reserve.
  • Subdial layout: chronograph minutes at 12, small seconds at 6.

Movements inside copies

Most copies run a Chinese clone of the Valjoux 7750. The 7750 puts the chronograph minutes at 12 and drives a running seconds hand, which matches the original layout after IWC's modification of the base calibre. That is the reason a good copy keeps the right subdial positions. A cheaper tier uses a quartz module. Quartz copies show a jumping seconds hand, and the original beats 8 times per second.

Ask the seller which movement sits inside. A 7750 clone adds 100 to 150 USD to the price.

Inspection points

  • Subdial spacing. A 7750 copy places the two subdials at the same gap as the original. A quartz copy spreads them apart.
  • Case profile. Lugs on the original taper to a point. Cast lugs look blunt.
  • Print. The IWC logo and the Schaffhausen line sit flat on the original. Raised ink is a tell.
  • Hands. Leaf hands have a polished bevel. Stamped hands show a flat edge.
  • Caseback text. Engraving on the original is shallow and crisp.

Price tiers

Entry copies sell for 80 to 150 USD. Mid-tier copies with a 7750 clone sell for 250 to 400 USD. Top-tier copies with a decorated movement and a sapphire crystal run 400 to 600 USD. Price tracks the movement, the crystal, and the dial finish. It does not track accuracy against the original.

What a copy cannot match

No copy carries an IWC movement, IWC service, or an IWC warranty. Resale value is close to zero. Movement finish is the largest gap: the 79350 has Geneva stripes, blued screws, and a skeleton rotor. Copies use printed plates or leave the plates bare. Case weight also differs when a copy uses a thin caseback or a plastic movement spacer.