The replica IWC Da Vinci IW376051 is a copy of IWC's round-case Da Vinci chronograph, built with a stainless steel case, a sapphire or mineral crystal, and a clone automatic chronograph movement. Serious versions cost about $250 to $450, entry versions run $70 to $180, and the gap shows in case finishing, subdial spacing, and movement quality.
What is the IWC Da Vinci IW376051?
IWC has redesigned the Da Vinci many times since 1969, moving from the original Beta 21 quartz model to tonneau cases and then to round cases. Listings for IW376051 describe a round-case automatic chronograph with a stepped bezel and a dial carrying chronograph registers plus a date window. Because the reference is not stocked by every dealer, confirm the case shape, diameter, and dial layout against photos of the genuine watch before ordering.
What should a good replica get right?
Proportion is the first test. A close copy keeps the case diameter within about a millimeter of the original and matches the lug width, case thickness, and bezel step.
- Dial printing: sharp logo spacing, correct font weight, no blurry text under magnification.
- Subdial geometry: registers centered on the 12, 6, and 9 positions with even spacing.
- Crystal: sapphire with anti-reflective coating on at least one side.
- Crown and pushers: matching shape, finish, and threading feel.
- Caseback: correct engraving depth, reference text, and serial placement.
Which movement should you choose?
Three tiers dominate the market. Japanese quartz builds are accurate and thin but have a ticking seconds hand and no chronograph feel. Asian 7750 clones are automatic, run the chronograph properly, and add the rotor wobble and thickness of the Valjoux design. Swiss ETA 7750 or Sellita SW500 versions cost the most and are the only ones a local watchmaker can service with standard parts.
How much does a replica IW376051 cost?
Price tracks the movement and the finishing, not the name printed on the dial.
- $70 to $180: quartz, plated case, mineral glass, dial faults visible at arm's length.
- $180 to $280: entry automatic, 316L steel, sapphire crystal, decent dial but soft case edges.
- $280 to $450: clone 7750 or Swiss automatic, sharp brushing and polishing, correct crystal and engraving.
How do you spot a low-grade replica?
Start with the reflection test. Cheap plating looks cloudy next to a mirror finish, and polished and brushed zones usually blend instead of separating at a crisp line. Then check the subdial hands, which should sit level with the dial, and the date font, which is often too wide on budget builds.
What are the limits and risks?
A replica is not a genuine IWC and holds no resale value, warranty, or collector standing. Water resistance claims are often optimistic, so keep the watch away from swimming and showers unless a watchmaker has pressure tested it. Customs seizure and local trademark rules vary by country, and shipping risk sits with the buyer in most cases.
Frequently asked questions
Is a replica IW376051 waterproof?
Most are rated 30 to 50 meters on paper, which covers splashes only. Gaskets on budget builds are often dry or missing, so treat the watch as resistant to rain and hand washing at best.
Can a jeweler service a replica Da Vinci?
Many watchmakers refuse replica work. If the build uses an ETA 7750 or Sellita movement, a general repair shop can usually handle a service, while quartz versions simply get a battery change.
How close is a high-tier replica to the original?
On the wrist, a top-tier copy can be hard to tell apart at a glance. Under a loupe, differences remain in engraving depth, dial printing, and the finish of the crown and pushers.